Tips for cutting costs and reducing wastage.

Jaguza Farm Support > Chicken > Tips for cutting costs and reducing wastage.

Tips for cutting costs and reducing wastage.

Feed accounts for 65% to 75% of a poultry or pig farmer’s total input costs. To get the most out of your feed, start with the most efficient animals for your production environment.  The feed efficiency of genetically improved animals is significantly higher than that of indigenous breeds.

Since the early 1960s, the feed conversion ratio of broilers and porkers, for example, has more than halved, with modern broilers requiring about 1,6kg of feed for every kilogram of weight gained and porkers needing approximately 1,9kg to gain a kilogram.

Having an animal that is genetically feed- efficient is not enough, however, as feed efficiency is also influenced by factors such as stress, environmental conditions, feed quality and ingredients, as well as the way in which the feed is provided. The animals should therefore be weighed regularly to determine if they are meeting targeted growth norms, as predefined by suppliers, and this growth should be counterbalanced by the volumes of feed given.

Most farmers are good at measuring growth rates, but few keep track of the volume of feed given, unless they have large operations where feed intake is measured automatically. If you don’t know how much feed you’re giving, you won’t be able to determine your efficiency or identify irregularities.

Avoid stress
Stress may have a negative impact on both feed intake and digestion, so it should be prevented as far as possible. While diseases cause stress in animals, overstocking and the stocking of too many age groups in the same place are the biggest problems.

Animals‘ feed ratios are governed by their age and productive stage.

Overstocking usually leads to increased competition for food and water, which exacerbates the situation. Access to sufficient clean, potable water is imperative, as feed intake and digestion will be affected negatively if the animals don’t drink enough water.

Both the pork and poultry industries have stocking density and space guidelines to prevent the overcrowding of animals and enhance animal welfare. The general recommendation is that at least a third of the animals should be able to use a feeder or drinker with ease at any given time.

But it also does not pay to have adequate stocking rates if equipment is not working properly. Feed and drinking equipment should therefore be checked regularly for breakages, leaks or blockages, and cleaned and maintained to ensure optimal functioning. This is especially true for layers, whose egg production will decrease significantly if they do not have access to sufficient water for three to four hours at a time.

Climatic conditions can also turn into stressors. Feed intake will decline significantly under hot conditions, and increase the colder it gets. Unfortunately, the higher intake during cold conditions is not translated into growth, but used by the animal to stay warm. Most farmers these days minimise the impact of climatic conditions on pigs and poultry through the use of heating, fans and humidity control systems, or by closing or opening houses to increase or reduce ventilation.

Feed should be stored and managed correctly to prevent decay and wastage. The general aim is to keep the feed dry and under cool conditions. The quality deteriorates quickly and the risk of fungal contamination increases when feed is kept in direct sunlight or hot sheds. It is wise to lock up feed to prevent theft.

To mix or not to mix
In most cases, it is better to buy preformulated feed from a feeding company than mix it yourself. As an added benefit, most feed companies offer feeding advice along with their product.

Mixing your own feed, in contrast, will not only require investing in expensive equipment and infrastructure, especially if you have an intensive poultry or pork production system, but will demand additional management, labour and skills to ensure the production of good-quality feed. You will also need to take into account the cost of feed ingredients, such as maize and oilcake, and transportation costs to get them to the farm.

The situation is complicated by the fact that pigs and poultry may require between nine and 11 different rations, depending on their development and production stages.

Rations given to lactating sows, for instance, are significantly different from those given to weaners and growers, whereas the rations for weaners and growers might also be adapted to suit different subgroups to accommodate the growing needs of the animals.

If you produce feed ingredients such as maize or lucerne on the farm, it might make sense to buy concentrates that exclude these ingredients, but this will also require mixing equipment that could make the cost unviable. Alternatively, you could deliver the ingredients at the supplier and then negotiate a discount on the feed.

Waste products, and safety
Many farmers supply their animals with what can be considered farm waste products, such as fruit and vegetables that were not suitable for the market, whey, bread, or soya or canola meal. Before using by-products, consult an animal feed specialist to identify the nutritional value of the product and formulate a feeding regime around this to ensure that the animals receive a nutritionally balanced ration.

Experts caution against the use of unregistered waste products, such as swill and chicken litter, as these can carry contagious diseases and food health risks that may negatively affect not only the farm, but the industry as a whole.

It’s against the law to sell any by-products as feed ingredients, unless these have been registered for feeding purposes. When using farm by-products, such as fruit and vegetables, make doubly sure the food is safe and doesn’t contain any toxins or foreign objects that could injure the animals. In the end, it makes more sense to reduce feed wastage and improve on-farm feed efficiency than to cut costs by buying cheap food.

You get what you pay for. Poor-quality feed will lead to animals not growing as fast as they should and may even lead to weight loss and nutritional deficiencies, which in turn/ may manifest in disease. It’s therefore better to stay with reputable brands.

error:
ASK JAGUZA AI  
WhatsApp Contact Jaguza Support